Rotronic HygroClip XD Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour les appareils électriques Rotronic HygroClip XD. ROTRONIC HygroClip XD User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
12.0928.0002
ROTRONIC AG, CH-8303 Bassersdorf
Tel. +41 44 838 11 44, www.rotronic.com
ROTRONIC Messgeräte GmbH, D-76275 Ettlingen
Tel. +49 7243 383 250, www.rotronic.de
ROTRONIC SARL, 56, F - 77183 Croissy Beaubourg
Tél. +33 1 60 95 07 10, www.rotronic.fr
ROTRONIC Italia srl
, I- 20157 Milano
Tel. +39 2 39 00 71 90, www.rotronic.it
ROTRONIC Instruments (UK) Ltd, West Sussex, RH10 9EE
Phone +44 1293 571000, www.rotronic.co.uk
ROTRONIC Instrument Corp, NY 11788, USA
Phone +1 631 427-3898, www.rotronic-usa.com
ROTRONIC South East Asia Pte Ltd, Singapore 339156
Phone +65 6294 6065, www.rotronic.com.sg
ROTRONIC Shanghai Rep. Office, Shanghai 200233, China
Phone +86 40 08162018, www.rotronic.cn
OK
OK
OK
OK
ROTRONIC
HygroClip
®
XD
Mit dem ROTRONIC HygroClip XD haben Sie ein Spitzenprodukt erworben,
das den gängigen Normen entspricht. Bei Beachtung der unten aufge-
führten Montage- und Bedienungshinweise funktioniert der HygroClip
über Jahre perfekt.
Einsatzbereich Feuchte: 0...100 %rF
Einsatzbereich Temperatur:
XDxx-xxx -40...85 °C
XDxx-xCxxxx -100...200 °C
Standard Messbereiche:
Alle Parameter sind frei skalierbar
Feuchte: 0...100 %rF = 0...1 V
Temperatur: -40…60 °C = 0...1 V
Tau- / Frostpunkt: Einstellbar via PC & HW4 Software
Technische Daten:
Versorgung: 5...24 VDC / 5...16 VAC
Stromverbrauch: ~7 mA @ 24 VDC / ~15 mA @ 5 VDC
Ausgangsbürde: 1 k/V
Kabellänge: max. 5 m
Schutzart: IP65 (ausser Sensorbereich)
Analoge Ausgänge: 0...1 VDC / 0...5 VDC / 0...10 VDC
Genauigkeit bei 23 °C ±5 K: ±0,8 %rF / ±0,2 K
Montage
Der Fühler soll so weit wie möglich in das zu messende Klima eingetaucht
sein.
ROTRONIC
HygroClip
®
XD
Your ROTRONIC HygroClip XD is a leading-edge product that meets all
established standards. It will work perfectly for many years if you follow
the assembly and operating guidelines below.
Operating range humidity: 0...100 %RH
Operating range temperature:
XDxx-xxx -40...85 °C
XDxx-xCxxxx -100...200 °C
Standard measuring ranges:
All parameters are freely scaleable
Humidity: 0...100 %RH = 0...1 V
Temperature: -40…60 °C = 0...1 V
Dew- / frost point: Selectable by PC using HW4 software
Technical data:
Supply: 5...24 VDC / 5...16 VAC
Power consumption: ~7 mA @ 24 VDC / ~15 mA @ 5 VDC
Load: 1 k/V
Cable length: max. 5 m
Protection rating: IP65 (except sensor area)
Analogue Outputs: 0...1 VDC / 0...5 VDC / 0...10 VDC
Precision at 23 °C ±5 K: ±0.8 %RH / ±0.2 K
Mounting
The probe should be immersed in the climate that is to be measured as
far as possible.
Anschluss
Setzen Sie den HygroClip XD auf den Gegenstecker des Anschlusskabels.
Achten Sie darauf, dass die Sperrnocken richtig ausgerichtet sind. Ziehen
Sie die Rändelmutter von Hand fest. Es sind Verlängerungskabel in den
Längen 10 m, 20 m, 50 m erhältich.
Justierung / Kalibrierung
Die Fühler sind ab Werk justiert. Wir empfehlen je nach Einsatz eine
Kalibrierung nach ca. einem Jahr. Dies kann vor Ort mit ROTRONIC SCS
Feuchte-Standards durch Sie erfolgen. Die Handhabung entnehmen Sie
der den Feuchtestandards beiliegenden Anleitung. Betreffend Justierung
kontaktieren Sie ROTRONIC oder unsere Vertretung.
Weitere Information unter www.rotronic.com
Connection
Plug the HygroClip XD on the mating connector of the cable. Make sure
that the catches are aligned correctly. Tighten the knurled nut by hand.
Extension cables are available with lengths of 10 m, 20 m, 50 m.
Adjustment / Calibration
The probes are adjusted in our factory before delivery. We recommend
calibration after about one year depending on use. You can do this yourself
on-site with the ROTRONIC SCS humidity standards. Please refer to the
instructions included with the humidity standards. Contact ROTRONIC or
our representatives concerning adjustment.
Further information can be obtained at www.rotronic.com
Electrical connections:Elektrische Anschlüsse:
1 green V +
2 gray GND (digital and power)
3 red RXD (UART)
4 blue TXD (UART)
5 white Analog signal, humidity
(0...100 %RH)
6 brown Analog signal, temperature
(-40...60 °C)
7 yellow AGND (analog ground)
1 grün V +
2 grau GND (Digital und Versorgung)
3 rot RXD (UART)
4 blau TXD (UART)
5 weiss Analogsignal Feuchte
(0...100 %rF)
6 braun Analogsignal Temperatur
(-40...60 °C)
7 gelb AGND (analog ground)
Vue de la page 0
1 2

Résumé du contenu

Page 1 - 12.0928.0002

12.0928.0002ROTRONIC AG, CH-8303 BassersdorfTel. +41 44 838 11 44, www.rotronic.comROTRONIC Messgeräte GmbH, D-76275 EttlingenTel. +49 7243 383 250, w

Page 2

12.0928.0002ROTRONIC AG, CH-8303 BassersdorfTel. +41 44 838 11 44, www.rotronic.comROTRONIC Messgeräte GmbH, D-76275 EttlingenTel. +49 7243 383 250, w

Commentaires sur ces manuels

Pas de commentaire